ADTRAN’s MX412 delivers full DS0 control to service locations, allowing carriers full utilization of DS1 bandwidth.Up to twelve full T1s of bandwidth are provided and are accessible at any point along the DS1 path. Data Ethernet connectivity is provided via four PPP connections. The MX412 costs less than half the price of other early generation remote management and bandwidth utilization products.
DS1 networking is practical and efficient with the ADTRAN MX412. Packaged in a 1RU, 19-inch chassis (optional 23-inch adapter), the MX412 routes DS0s between the twelve DS1 interfaces and allows access to any DS0 at any node. The MX412 interfaces to twelve RJ48 connectors and provides the ability to drop and insert up to 24 DS0 signals from any DS1 interface on the terminal side. The DS0s may be routed to another DS1, V.35 port, FXS or used for Ethernet network extension throughout the network and Telnet-based terminal server ports.
Twelve RJ-48 long-haul T1 connections with outside plant protection
A four-port Ethernet switch
One V.35 port
Four-port terminal server (RS-232)
One FXS port
DB-9 craft port (RS-232)
Non-Blocking DS0 cross connect between all DS1 interfaces and the V.35 port
Manual and remote initiated loopback modes
Telnet management over 10/100 LAN or VT100 via the local RS-232 craft port
Robbed Bit Signaling (RBS) supported on a per DS0 basis
Front panel data connections
Meets NEBS Level 1 requirements
Accepts redundant ±60 to ±22 VDC inputs
Delivers full DS0 control to service locations, allowing carriers full use of DS1 bandwidth
Interfaces to 12 long-haul outside plant protected DS1s by way of RJ-48 connectors
Houses an internal Power Supply Unit (PSU)
