The Nextiva S2610e professional IP camera features super wide dynamic range and low lux sensitivity for excellent image quality in high-contrast and day/night lighting conditions. Designed for high performance and low cost of ownership, the S2610e incorporates Verint's industry-leading encoding technology to provide excellent image quality, while using far less network bandwidth than comparable high-end IP cameras. Available on-board analytics rapidly detect significant activity without sending all video to centralized servers for analysis, further reducing the amount of video to transport and store. Dual-stream video enables high-quality video viewing and optimal storage use, and support for both interlaced and progressive scan video provides distortion-free images on analog and digital video monitors, enabling organizations to realize the benefits of IP video using their existing analog equipment.
The S2610e is built for easy installation and operation in virtually any video system - from all IP to all analog and anywhere in between. An analog output comes standard with the S2610e for fast and accurate setup on site, and available Power over Ethernet reduces wiring requirements and installation costs.
| General |
| Imaging Device |
1/3-inch digital sensor (DPS technology)
Zero smear |
| Dynamic Range |
102 dB typical/120 dB maximum |
| Picture Elements |
742(H) x 554(V) |
| Synchronization |
Internal |
| Iris Control |
Automatic/manual |
| Auto Iris Lens Type |
DC-drive |
| Day/Night Support |
Automatic IR filter drive |
| Lens (Optional) |
Varifocal 2.9-8mm F0.95, DC auto iris, IR compatible
Focusing range: 0.3m to infinity |
| Angle of View (H x V) |
Wide: 94º x 69º; Tele: 35º x 26º (with supplied lens) |
| Network |
| Interface |
Ethernet 10/100Base-T |
| Connector |
RJ-45 jack |
| Protocols |
Transport: RTP/IP, UDP/IP, TCP/IP, or multicast IP
Others: DNS, NTP, HTTP, FTP, and DHCP client |
| Security |
SSL-based authentication |
| Video |
| Analog Output |
1 composite, 1 Vpp into 75 ohms (NTSC/PAL)
Connectors: BNC female |
| Horizontal Resolution |
520 TVL (RGB), >480 TVL typical |
| Vertical Resolution |
460 TVL |
| Minimum Illumination |
S2600e: 0.5 lux, F/1.2, 40 IRE in color
S2610e: 0.05 lux, F/1.2, 40 IRE in black and white |
| Signal-to-Noise Ratio |
Greater than 48 dB |
| Compression |
MPEG-4 SP; MJPEG available on some models and can be run simultaneously with MPEG-4 SP |
| Resolution |
Scalable from 176 x 128 to 704 x 480 pixels NTSC and 176 x 144 to 704 x 576 pixels PAL |
| Frame Rate |
1-30fps programmable (full motion) |
| Bandwidth |
Configurable 30Kbps to 6Mbps |
| Dual Stream |
4CIF/30fps and CIF/15fps programmable |
| Alarm |
| Input |
1 dry contact |
| Output |
1 relay contact (48V AC/DC at 100 mA max.) |
| Power |
| Supply Voltage |
12V DC +/- 10% or PoE 802.3af Class 3 device (not available with on-board analytics) |
| Connector |
5.5W (7.5W with on-board analytics) |
| Physical |
| Lens Mount |
CS mounts |
| Camera Mount |
1/4-inch UNC-20 screw, bottom of camera housing |
| Enclosure |
Metal case |
| Dimensions |
5.5L x 3W x 2H in. (140L x 76.5W x 51H mm) |
| Weight |
0.82 lbs (0.37 kg) |
| Environmental |
32ºF to 122ºF (0ºC to 50ºC), 32ºF to 104ºF (0ºC to 40ºC) with analytics |
| Humidity |
95% non-condensing at 122ºF (50ºC) |
| Management |
| Configuration |
Nextiva, nDVR, Loronix Video Manager, SConfigurator, or Internet Explorer 6.0 |
| Firmware Upgrade |
Flash memory for upgrade of application firmware over the network |
| Certification and Regulation |
| RoHS compliant |
| USA |
FCC Part 15 (Subpart B, Class A) |
| Canada |
ICES-003/NMB-003 |
| Europe |
CE marked, EN 55022: 1998 Class A, EN 55024 |
| Models |
| S2600e |
Super wide dynamic range IP cameras |
| S2610e |
Super wide dynamic range IP cameras with day-to-night function |
S2600e-AS/
S2610e-AS |
With on-board analytics* |
S2600e-L1/
S2610e-L1 |
With 2.7x zoom lens |
| S2600e-AS-L1/ S2610e-AS-L1 |
With on-board analytics* and 2.7x zoom lens |
