The ZyXEL IES-6000M is equipped with non-blocking Gigabit backplane, failover-enabled Management Switch Cards (MSC), dual input power modules and various high-port density multi-purpose line cards. With comprehensive IP-centric firmware features, the IES-6000M is a high-capacity system that facilitates Telco/ISP to deliver high-quality residential or business user services experience at competitive CAPEX/OPEX as well as satisfying its current and future infrastructural requirements of reliability, flexibility and scalability.

The IES-6000M is a 12.5 U-height, 17-slot chassis-based IP DSLAM capable of adopting the same Multi-Service line cards as those installed in IES 5000/5005 system. A new introducing MSC1024G control card with 8G grouping uplink is designed to plug into slot 8 and/or slot 9, while the remaining slots are available for equipping various line cards. Followed by MSC1224G, two 10G Gigabit Ethernet over fiber uplink will be available in near future.

The variety of line cards are including 48-port ADSL2+ line cards (over POTS and ISDN individually) that provide subscribers with asymmetric transmission bandwidth up to 25Mbps/2.4Mbps; 48-port SHDSL.bis line cards with symmetric transmission bandwidth of 4.096 Mbps (2-wire), 8.192 Mbps (4-wire) and 16.384 Mbps (8-wire); 24-port VDSL2 line cards that offer up to profile 17a (100Mbps/50Mbps)* high-speed connectivity per port over copper wires as well as 48 ports VoIP line card that support either H.248 or SIP protocol. The primary designed concept of IES 6000M is also taking account of the further technology evolution such as GPON.

The IES-6000M supports 1+1 MSC redundancy with a failover switch time less than 1 second. In addition, voltage, temperature and FAN speed sensors are fitted into the system. When an abnormal condition is detected, the LED displays and/or the corresponding alarms will alert administrators of the situation. In case the system temperature rises over the preset threshold, thermal cutoff protection will kick in to shut down the system automatically.

 

 

	768 ports, 17 vertical slots with a maximum configuration of 1 MSC card and 16 Line cards
	Multi-service interfaces including ADSL 2/2+,G.SHDSL.BIS, VDSL 2 and VOIP
	IP-aware bridge to facilitate Mac address limitation and security breach of large-scale Layer 2 infrastructure deployment
	Comprehensive QoS to enhance triple play users' experience
	Field proven IGMP v1, v2 snooping and proxy for IPTV deployment
	Flexible ACL, VLAN-aware DHCP and Anti-IP/MAC address spoofing to prevent malicious attack
	DHCP option82 relay and ARP proxy build in to boost the stability of network
	PPPoAoE, TACACS+ support for legacy routers remote authentication
	Cluster management to reduce multiple DSLAM administration efforts via a single IP address

 

 

DSL Compliant 1	ADSL: G.992.1 Annex A, G.992.3 Annex A, G.992.5 Annex A G.992.1 Annex B, G.992.3 Annex B, G.992.5 Annex B Support G.992.3 and G.992.5 Spectral Mask Support Annex M and Annex L in G.992.3 and G.992.5 Support EOC and Overhead Channel Access
DSL Compliant 2	Support the latency path function Support loop diagnostic function specified Support the power management capability Support the capability of the Seamless Rate Adaptation (SRA) on-line configuration Single and Dual end loop test SHDSL: G.991.2, G.991.2.bis VDSL2: G.993.2, G.994.1, G.997.1.
ATM Traffic Management	8 VPC/VCC per DSL port Support UBR, CBR, rt-VBR, nrt-VBR, ABR QoS Mechanisms Support ATM Forum TM 4.0 peak cell rate traffic parameter Support downstream traffic shaping function per ATM PVC Support ATM F5 OAM cells for End-to-End Loop back test (ITU-T Rec. I.610)
Performance	Eight queues with packet priority scheduling (SPQ, WRR) Support 512 IGMP multicast groups The maximum channel zapping processing time is 250 ms DSCP to 802.1p mapping
Security	Per Port and Per VLAN isolation IEEE 802.1x (Authentication) Rule-based packet filtering (L2 -L4 ACL) MAC count limiting ARP broadcast filtering DHCP broadcast filtering VLAN aware DHCP snooping NetBIOS filtering IGMP filtering Anti IP/MAC address spoofing Support TACACS+ remote authentication
VLAN	4094 IEEE 802.1Q compliant VLAN tagging VLAN stacking ( Q in Q ) VLAN Bridge Function (multiple PVCs to one VLAN) (N:1) PVC and VLAN one to one mapping (1:1) VLAN Trunking (Single PVC join Multiple VLAN) (1:N) Support GVRP function
Traffic Management	Bandwidth control and Broadcast/Multicast/Unknown Unicast control on Gigabit Ethernet ports RSTP: IEEE 802.1d, IEEE 802.1w, IEEE 802.1s IP Bridge IEEE 802.3ad (Link Aggregation Control Protocol) IP multicast forwarding IGMP v1, v2 snooping/proxy IGMP multicasting channel limiting VLAN aware DHCP snooping DHCP Relay Option 82 with Sub-option 1 & 2 PPPoE intermediate Agent Multicast bandwidth control L2-L4 ACL IGMP group count / filtering profile
Network Management 1	Local management through a craft terminal Web-based Management Interface Cluster Management (Up to 8 cluster members) View-based Network Management XML-based North Bound Interface In-band and out-of-band IP interface for management (SSH, SFTP) SNMP Management (through ZyXEL NetAtlas Access EMS) SNMPv1/v2c/V3 agent/traps
Network Management 2	Standard MIBs RFC 1213 MIB II ADSL Line MIB (RFC2662)/ Extension Line MIB(RFC 3440) SHDSL Line MIB (RFC 3276) VDSL line MIB (RF3728) Bridge MIB/Extension MIB RMON MIB (RFC 1757) Vendor specific MIBs, e.g., Chassis Management MIB (Fan Speed, Voltage, Temperature)
Hardware	17-slot rack mountable enclosure, 19" or 23" chassis Maximum 16 slots for DSL line cards (slot 1-7, 8 or 9, 10-17) 2 slots for management and switch cards (Slot 8 & 9) 2 DC power input module and filter One FAN and dust filter module One Alarm Module
Operating temperature	0deg. C - 50deg. C
Storage temperature	-40deg. C - 70deg. C
Humidity	10-95% (non-condensing)
Power Supply	-36 - -72V DC
Power Consumption	1080W
Dimensions (W x D x H)	439.2 x 280.5 x 543.3 mm / 17.29 x 11.04 x 21.38 inches
Weight	15 Kg / 33.06 lbs