With Tripp Lites HDMI Over Cat5/Cat6 Wallplate Extender Kit, you can locate a HDMI enabled display up to 230 ft. away from the HDMI source, using 24Awg, Solid wire Cat5e/6 cabling. The kit consists of a Passive wallplate at the source side, and an Active wallplate (with built-in signal regenerator) at the display side. Simply run two Cat5/6 UTP cables between the two wallplates, and plug in standard Tripp Lite HDMI patch cables to the HDMI source and the display. The Green LED on the Display wallplate lets you know that power and a signal are coming from a connected source. The Red LED indicates only a signal is being received. The kit is functioning properly when the unit is connected to a display and the Green LED is lit. Both Digital Video annd Audio Signals are passed through. 1 Year Limited Warranty
Features:
- Break the 5-meter HDMI barrier using Cat5/6 UTP Cable
- Supports video resolutions up to 1080p (24Hz)
- 1080p Resolution up to 115 ft.
- 720p Resolution up to 196 ft.
- 480p Resolution up to 230 ft.
- Transfers both Digital Video and Audio signals
- For best performance, use Solid conductor Cat6 cable (Model # N222-01K-BL)
- Termination Tool included for punching down UTP wire
- Use 24Awg, Solid wire Cat5e/6 cabling to ensure maximum distance and perfomance
- Use Tripp Lite P568 HDMI cables from wallplates to devices
- HDMI v1.3 and HDCP compliant
-
1 Year Limited Warranty
Typical Applications:
- Home or Business theater installations where the HDMI display is more than 5 meters from the source
