70-300-1120

SKU: 70-300-1120
Verint Systems Canada Inc. S1712e-T-12iA Compact, 12-Port Video Encoder
List Price: $3,550.00
Price: $2,579.17
You Save: $970.83 (27%)
70-300-1120
70-300-1120
Product Details
Network
Interface Ethernet 10/100Base-T
Connector RJ-45 jack
Protocols Transport: RTP/IP, UDP/IP, TCP/IP, or multicast IP
Others: DNS, NTP, HTTP, FTP, and DHCP client
Security SSL-based authentication

Video
Input 12 composites, 1 Vpp into 75 ohms NTSC/PAL
Dual Stream 4CIF/7.5fps and CIF/30fps programmable
Connectors BNC female
Compression MPEG-4 SP, SM4
Resolution Scalable from 352x240 to 704x480 pixels NTSC and 352x288 to 704x576 pixels PAL
Frame Rate 12 x 1-30fps NTSC, 1-25fps PAL programmable (full motion)
Bandwidth Each stream configurable from 30Kbps to 6Mbps

Serial Port
Electrical Levels Port 1: RS-232 (max. 230 kbps)
Port 2: RS-422/485 2/4 wires (max. 230 kbps)
Connectors Port 1: DB-9 female (DCE)
Port 2: pluggable screw-terminal strip
Operating Mode Transparent serial port supporting any asynchronous serial protocol

Alarm & Audio
Alarm Input: 12 dry contacts
Output: 2 relay contacts (48V AC/DC at 100 mA max.)
Bi-Directional Audio (optional) Input: -46 to -3 dBV into 30 kohms (line or microphone)
Output: -46 to -3 dBV into 8 ohms min.
Connectors: 1 set of 1/8 in. (3.5 mm) input and output stereo jacks
Uni-Directional Audio (optional) Input: 12 ports
-46 to -3 dBV into 30 kohms (line or microphone)
Programmable bias: 0-9V DC
16-bit resolution
8, 16, or 24 KHz sampling rate
Connectors: 1 set of 1/8 in. (3.5 mm) input stereo jacks

Power
Supply/Voltage 12V DC +/- 10% (20W)

Physical
Enclosure Metal case with flange mount (black)
Dimensions 17L x 6.1W x 1.7H in. (431.8L x 154.9W x 43.2H mm)
Weight 5.3 lbs (2.4 kg)
Environmental 32ºF to 122ºF (0ºC to 50ºC)
Humidity 95% non-condensing at 122ºF (50ºC)

Management
Configuration Remote: Nextiva, SConfigurator
Local: via the serial port using any ASCII terminal
Firmware Upgrade Flash memory for upgrade of firmware over the network; remote batch upgrade available through Nextiva Control Center and SConfigurator