PL-048

SKU: PL-048
Phybridge Inc. PL-048 48 Port PoLRE(NVT-Phybridge Inc.NV-PL-048PoLRE 48 Port Single Pair UTP Long Reach Managed PoE Switch (1 Year Warranty Included) )
List Price: $4,900.00
Price: $3,115.00
PL-048
PL-048
PL-048
PL-048
PL-048
PL-048
(Click to see larger image and other views)
Product Details
Phybridge Inc.
NV-PL-048
  PL-024 PoLRE 24 Port Switch:

The award winning 24 and 48 Port PoLRE (Power over Long Reach Ethernet) switches deliver ethernet and PoE over a single pair of wire with over 1,200 ft (365 m) reach. This means you can transform your single pair UTP infrastructure into a robust IP backbone with power.

PoLRE was designed to make the migration to IP quick, easy and cost effective by leveraging an existing single pair UTP in frastructure. Benefits include:

  • Accelerating your return on investment by reducing infrastructure costs;
  • Collapsing planning and deployment time;
  • Eliminating infrastructure barriers, risks, disruption and costs;
  • Creating a robust IP platform that is easy to configure, deploy and manage.

Unlike other Ethernet switch technologies, the PoLRE switch offers:

Speed, Reach and Power

PoLRE delivers 10 Mbps (symmetrical, full duplex) and PoE over a single pair of UTP with over 1,200 ft (365 m) reach. It is designed to support IP phones and other IEEE compliant devices. No speed degradation with longer reach.

Industry Leading PowerWISE® Technology

Power sharing for redundancy, load balancing, AC/DC options, hot swappable power supply and auto-sensing 100-240 VAC delivering 500 to 1,000 Watts of power. PoLRE is one of the most energy efficient switches on the market, consuming less than 17 Watts of power to operate.

Managed Switch with Plug-and-Play Option

PoLRE can operate in a transparent mode functioning as a bridge, allowing for plug-and-play deployment to a fully managed switch with high value features including:

  • Power management by port for easy reset of ports;
  • Port MAC locking for higher security and peace of mind; and
  • Simple Network Manager, an intuitive Web GUI that makes managing the switch a breeze.

PoLRE 24 & 48 Port Managed Switch Technical Specifications

Model NV-PL-024 & NV-PL-048
Dimensions 19 inches (48.26cm) x 1U without rack ears:

•1.75” x 17.13” x 9.92” (HxWxD)

•4.45cm x 43.5cm x 25.2cm (HxWxD)

•Weight 7.94 lb (3.6 kg)

Mounting Standalone or rack or shelf-mountable 2 brackets included for installation
Processor Broadcom BCM56018 switch processor, 266MHz
Memory 32MB FLASH, 64MB DDR SDRAM
Interface:

Ethernet

Uplink (Trunk IP)

Maximum 2 uplinks, each 1Gb/s (full duplex), either:

•2 mini-GBIC ports: 1000 Base-TX/SX/LX/ EX/ZX/LHX (determined by SFP, transceiver module installed), Ethernet IEEE 802.3z, fiber optic cable, or

•2 RJ45 ports: 10/100/1000 Base-T autosensing, independent speed selection, Ethernet IEEE 802.3, CAT5e copper cable

Interface:

Downlink

(PoE and IP to Adapter)

PL-024: 1 RJ21 male telco connector (standard), 24 pairs used

PL-048: 2 RJ21 male telco connectors (standard), 48 pairs used Maximum Distance: 1200ft (365m) over CAT3 UTP cable, 24 AWG

Speed: 10 Mbps (full duplex)

Power: 15 Watts

Management 1 LAN port (MGMT): RJ45, 10/100 Base-T auto-sensing, IEEE

802.3 1 UART console port: RJ45 to DB9 cable

Power Supply Unit auto-sensing 100-240VAC, 50/60 Hz

Power output: 500W max at 100VAC, 1000W max at 240VAC

Power Consumption PL-024: 16.5W PL-048: 22W
Power Injection (PoE) DC voltage: -54VDC; Endpoint devices must be compliant with IEEE 802.3af
PowerWISE® Power Sharing 2 male connectors (rear), DC IN and DC OUT: 48VDC to 56VDC
Operating Temperature 14°F to 122°F (-10°C to 50°C)
Humidity 10% to 95% (non-condensing) at 95°F (35°C)

Phylink Adapter Technical Specifications

Model NV-PL-PA-011-6 (sold as 6 pack)
Dimensions •0.71” x 1.1” x 2.56” (HxWxD)

•1.8cm x 2.8cm x 6.5cm (HxWxD)

•Weight: 0.78 oz. (22 g)

Interface

PoLRE Switch Side

1 RJ11 port: CAT3 unshielded single twisted pair cable. Between the wall plate and adapter, you can reuse the existing line cord when doing a DNIC/POTS displacement.
Interface Ethernet side: for IP end point device 1 RJ45 port: 10 Base-T
Power Supply 48VDC
Power Consumption 0.9W
Power Injection (PoE) DC voltage on RJ45 port:

•54V max

•37V when 1200ft (365m) away from its PoLRE Switch powers Class 1, Class 2 and some Class 3 IEEE 802.3af compliant IP devices

Operating

Temperature

32°F to 104°F (0°C to 40°C)
Humidity 10% to 95%

(non-condensing) at 95°F (35°C)

NV-PL-048